|
| Brand Name: | SONGO |
| MOQ: | 2 pieces |
| Price: | CN¥989.32/pieces 2-29 pieces |
| Payment Terms: | L/C,D/A,D/P,T/T,Western Union |
| Supply Ability: | 5000-10,000Pieces/Month |
Descriptions Of Lever Float Ball Steam Trap:
The lever ball float type steam trap is for continuous drainage, the subcooling degree is about 5°℃, and the back pressure rate is over 95% (back-end pipeline pressure/steam pressure). In general, the safety factor is 2-3 times when selecting, and 5-8 times for air separation units and drying cylinders. Condensate volume and differential pressure of steam-using equipment are important indicators for model selection. The same type of trap increases with the increase of pressure difference and displacement. Special reminder: Please do not mistakenly think that a trap with a large diameter has a large displacement. The lever ball float trap is installed horizontally at the bottom of the pipeline or equipment
Design Features Of Lever Float Ball Steam Trap:
1). The lever ball float type steam trap is made of ASTM216 WCB/WC6 /CF8/ CF8M stainless steel, some bonnets are made of ASTM A105/F304/F316, the inner parts are made of stainless steel, and there is a built-in filter device.
2). Nominal pressure: PN25
3). Max allowable temperature: 425C,Max operating temperature: 350°C
4). Connection type: threaded RC or flange (GB/T9124.1-2019; HG/T20615-2009; HG/T20592-2009, etc.)
5). Lever ball float proportional regulating steam trap is characterized by change according to condensate discharge rate large proportional displacement, long life, good energy-saving effects, water hammer resistance, and beautiful appearance. It is widely used in process heat tracing, jacket heating kettles, reboilers and other equipment.
Part Material Of Lever Float Ball Steam Trap:
| NO. | Part name | Material | NO. |
Part name
|
Material |
| 1 | Body | CI,WCB,SS304 | 8 | Vale seat | A276 430 |
| 2 | Bonnet | CI,WCB,SS304 | 9 | spring | 17-4PH |
| 3 | Bonnet bolt | 42CrMoA | 10 |
Diaphragm capsule |
SS304 |
| 4 | Float ball | SS304 | 11 |
Diaphragm support plate |
SS304 |
| 5 | Main valve core | SUS440 | 12 |
Diaphragm seat |
A276 430 |
| 6 | Main valve bolt | 42CrMoA | 13 |
Diaphragm retaining cover |
SS304 |
| 7 | Bracket | SS304 | 14 | Bonnet gasket | SS304+Graphite |
Structure Dimension Drawing Of thread Lever Float Ball Steam Trap:
| FT14HC Thread type | ||||||
| DN15 | 121 | 120 | 75 | 198 | 8.8 | |
| DN20 | 121 | 120 | 75 | 198 | 8.8 | |
| DN25 | 121 | 120 | 75 | 198 | 8.8 | |
Structure Dimension Drawing Of flange Lever Float Ball Steam Trap:
| FT43 Flange type | ||||||||
| Size | A | B | C | D | D1 | D2 | D3 | Weight (Kg) |
| DN15 | 150 | 105 | 70 | 250 | 95 | 65 | 45 | 9 |
| DN20 | 150 | 105 | 70 | 250 | 105 | 75 | 55 | 9.2 |
| DN25 | 160 | 105 | 70 | 250 | 115 | 85 | 65 | 9.5 |
| DN32 | 230 | 115 | 75.5 | 335 | 135 | 100 | 78 | 20 |
| DN40 | 230 | 115 | 75.5 | 335 | 145 | 110 | 85 | 20 |
| DN50 | 230 | 115 | 75.5 | 350 | 160 | 125 | 100 | 21.5 |
No Worries After Buy Our Valves With Our Engineers:
Frequently Asked Questions: